Navigator TXT MULTIHUB 2
The top-of-the-range solution versatile, quick, intuitive, in any situation
The innovative vehicle interface by TEXA that allows operating on cars, heavy-duty vehicles, motorcycles, boats, agricultural and construction vehicles, in a versatile, quick and intuitive way. It has a built-in display, very useful to view the most important information during the diagnostic operations.
It automatically manages the CAN, CAN FD, DoIP, PassThru communication protocols fully, and the “on board” Linux operating system
ensures intelligent connectivity.
Moreover, MULTIHUB 2 enables the remote diagnosis, allowing users to carry out an extensive range of operations thanks to expert personnel
that guarantees specialised support.
The IP53 certified rugged design and the MIL-STD 810G military standard (transit drop test) complete the extraordinary equipment on TXT MULTIHUB 2 and make it a true top-of-the-range solution capable of giving its best in every operational situation.
Wi-Fi module for the diagnostic operations that use standard CAN, CAN-FD and DoIP.
Network cable (Ethernet) reserved for DoIP operations (ISO 13400).
USB socket for all types of diagnosis, including the Pass-Thru (SAE J2534-1 and SAE J2534-2).
Bluetooth module for conventional diagnoses.
TECHNICAL SPECIFICATIONS:
• Type: iMX6 1 GHz
• DDR3L SDRAM: 512 MByte
• Mass Storage: eMMC 8 GByte
Coprocessor:
• Type: STM32H735IGK6 550MHz
• RAM: 2 MByte SRAM, 32 MByte SDRAM
• Flash: 2 MByte
Power supply connector: PWR: 2.1 DC jack
Power supply: 12 – 24 V (direct voltage)
(from vehicle battery via OBD connector or specific
wirings)
Consumption: 1 A @12 V
0.5 A @24 V
USB connectors:
• USB: USB 2.0 host type A max 1 A out
• USB DEVICE: USB 2.0 device type B (priority connector)
Bluetooth communication: BDR/EDR/LE1M
Wi-Fi communication: WiFi IEEE 802.11 b/g/n20 (2412 ~ 2462 MHz)
Operational band: 2400 ~ 2483,5 MHz
Maximum radio frequency power transmitted: 10 dBm (2400 ÷ 2483,5 MHz)
Diagnostic connectors: DIAGNOSIS: DSUB-26HD (ISO 22900-1)
Electronic switch: 2-way, 13 independent positions
Control units reprogramming connector: PV (SAE J2534-1)
Supported protocols:
• Blink codes
• K, L (with 100 mA current protection), ISO9141-2, ISO14230
• CAN ISO11898-2 High Speed
• CAN_FD 11898-2:2016 4 channels
• CAN ISO 11898-3 LOW Speed
• CAN SAE J2411 Single Wire
• SAE J1850 PWM
• SAE J1850 VPW
• SAE J2534-1
• SAE J1708
User interface: Display OLED 64×128 dot
Operating temperature: 0 ÷ 50 °C
Storage temperature: – 20 ÷ 60 °C
Operating moisture: 10% ÷ 80% without condensation
Weight: 600 g
IP protection level: IP53 (With properly closed protective caps)
Directives:
• RED 2014/53/EU
• RoHS 2011/65/EU and Delegated Directive 2015/863/EU
Electromagnetic compatibility:
• ETSI EN 301 489-1
• ETSI EN 301 489-17
Radio systems: ETSI EN 300 328
Electrical safety: EN 62368
Related products
Auto Diagnostic Tools
Auto Diagnostic Tools
Auto Diagnostic Tools
Auto Diagnostic Tools
Auto Diagnostic Tools
Auto Diagnostic Tools
Auto Diagnostic Tools
Auto Diagnostic Tools
