KONFORT 760R 2 GAS READY
This model is equipped with a high visibility colour TFT display with a graphic interface for ease of use.
The service management procedure is fully automatic, so there is no requirement for manual taps.
The distinctive features are the hermetically sealed bottle system, automatic service management system, refrigerant measurement and scale locking system.
The 760R can be purchased configured either for the old R134a refrigerant or the new R1234yf refrigerant. A retrofit kit is also available to change refrigerant type.
KONFORT 760R BUS: IDEAL FOR LARGE A/C SYSTEMS
The 760R BUS specifically developed for larger systems. Is equipped with a 30 Kg internal storage tank, a larger 21cc compressor for refrigerant and a 146l/min dual stage vacuum pump, able to generate depression of 0.030 mbar.
Like the standard 760R, the Bus version too can work either with the older R134a refrigerant or with the new R1234yf, and can switch from one to the other with the installation of a retrofit kit.*
SPECIFIC SERIES SOLUTIONS
REFILLABLE HERMETICALLY SEALED OIL BOTTLES
Because standard bottles are not hermetically sealed, they always contain a percentage of air. The water molecules in the air bind with the oil and contaminate it. TEXA’s solution was to create special containers which prevent the oil from becoming contaminated by air and humidity. These have been patented. These special bottles can be re-used thanks to a special system which removes the air from the bottle.
HYDRAULIC SYSTEM FLUSHING
In order to guarantee safety and efficiency, it is important that each type of oil and refrigerant are not cross contaminated. TEXA have therefore developed a special automatic flushing function to clean the internal circuits of the service station.
AUTOMATIC BOTTLE IDENTIFICATION
With the introduction of new vehicles, particularly electric and hybrid vehicles, new oils have been introduced for these applications. The correct oil type must be used relating to the air conditioning system to be serviced (eg PAG or POE). It is potentially damaging and dangerous to inject non-compatible oils into the system, so the operator must take care to avoid mistakes. TEXA has developed an automatic oil bottle recognition system which, by comparing the data contained in the vehicles database, signals if the incorrect bottle is in use.
TILT SENSOR SYSTEM FOR ACCURATE READINGS
The scales used for refrigerant measurement can be inaccurate when used on uneven surfaces. TEXA’s patented TILT SENSOR SYSTEM analyses the scales horizontal positioning and alerts the operator to the fact that the readings may be inaccurate.
FAN PROTECTION SYSTEM
The new R1234yf refrigerant has been classified as being ‘highly flammable’ and this must be acknowledged by the operator. The KONFORT 700 series air conditioning recharge stations. adopts a high efficiency redundant fan system to eliminate any possible refrigerant build up within the unit.
AUTOMATIC LEAK DETECTION MANAGEMENT
The KONFORT 700 series units automatically carry out a dual leak detection check. All safety related operations take place automatically in order to eliminate errors.
TEXA operating software conforms to the strictest requirements of accuracy and precision.
Any possible faults or messages are displayed via detailed error messages. TEXA software manages the recovery and recharge processes, in order to guarantee precession that was previously unknown.
In particular, the automatic procedures assist the operator with repairs on highly sophisticated systems, such as those fitted on the new hybrid vehicles. All models have a removable SD card which allows communication with a Windows PC to update vehicle make and model database, check and certify all services and potential software updates.